Amazone Pantera 4503, Руководство по эксплуатации

Страница: 112 / 120

Fault
112 ISOBUS field sprayer BAG0171.9 11.20
F17911 Small
message
box The position detection for boom folding
has detected that at least one boom is not
folded-in to the stop.
•
Activate boom folding again and
completely fold-in / fold-out the
boom
•
Check the sensors and cable of the
angle detection on the boom sec-
tion
•
Check the hydraulic cylinder and
the boom folding mechanisms
F17914 Small
message
box If one of the boom locking sensors is
activated (fold boom) and AutoTrail is not
yet in road mode.
---
F17917 Small
message
box Working position is not active (boom in
transport position) and manual mode or
automatic mode of the steering is active
and the speed is less than 15 km/h
•
Lock the axle for road travel
•
Reduce speed and establish working
position
F17918 Small
message
box In road mode, an attempt was made to
activate a steering function or to activate
automatic mode of the steering system
•
Reduce speed (lower than 7 km/h)
•
Activate field mode (unlock axle)
F17920 Small
message
box After starting the implement or automati-
cally moving to the center position, the
axle is not in the position for straight
ahead travel.
•
Establish the oil supply connection
•
Move the axle manually to the center
position
F17924 Small
message
box While attempting to load the oil reservoir,
the oil pressure drops under 130 bar
•
Increase the tractor engine speed
•
Check the oil filter
•
Check the oil supply from the tractor
F17925 Small
message
box Rate control changed from automatic
mode to manual mode
•
A target pressure can be set with the +
and - softkeys; the sprayer regulates
the specified pressure, regardless of the
forward speed and active part-width
sections
•
Activate the automatic rate control soft-
key to return to automatic mode
F17926 Small
message
box Spring suspension is not in automatic
mode and the speed is greater than 0
mph (km/h)
•
Move the spring suspension to automat-
ic mode
F17929 Small
message
box Active band spraying - function replace
nozzles, extra nozzles, or edge nozzles
activated
•
Activate area spraying and call up the
function again