Amada ML-2350A-CE Скачать руководство пользователя страница 62

Страница: 62 / 235

ML-2350A/2351A

1. Setting Welding Schedules

How to Use the Touch Panel

The laser controller of this laser welder adopts a touch panel type that permits

touching the screen directly for an operation. Press the displayed button portion on

the screen with a finger to select a screen or perform each setting.

There are screen selecting buttons, ON/OFF setting buttons, numeric value inputting

buttons and others.

Screen selecting button
Regarding the screen selecting buttons, the selected screen button is displayed in

green.

ON/OFF setting button
Regarding the ON and OFF setting buttons, OFF is displayed in blue and ON is

displayed in blinking green. When the OFF blue button is pressed, a check window is

displayed. If OFF is switched over to ON by pressing the ON or YES button, the ON

setting is displayed in green.
Example:

→

When pressing ON →

*   There are some buttons displayed in green at ON.
*   There are some buttons that change the setting without displaying a check window.
*   While the ON/OFF setting windows is displayed, screens cannot be switched even if

another button is pressed.

Numeric value inputting button
When this button is pressed, a numeric keypad is displayed and then a numeric value

can be input. When there are multiple input items, change the item by using the

key. The input value is definitively set by pressing the

key.

Example:

→

Numbers of the numeric

keypad are pressed and then

the

key is pressed.

ON/OFF setting button

Numeric value inputting button

Screen selecting

button

Содержание ML-2350A-CE












































































































































































































































Результаты поиска

Содержание ML-2350A-CE

Отзывы:

Amada ML-2350A-CE, Руководство по эксплуатации, Страница: 62 / 235

Результаты поиска

Содержание ML-2350A-CE

Отзывы: