Amada ML-2350A-CE, Руководство по эксплуатации, Страница: 101 / 235

1. Setting Welding Schedules
101
ML-2350A/2351A
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Switching the Pulse Width Setting Range
(MEMORY SWITCH Screen)
In the following, the method of changing the pulse width setting range for laser
light (laser output time ms) by displaying the MEMORY SWITCH screen from
the INITIALIZE screen is explained.
Usually, this setting permits switching the pulse width of 0.1 ms step over to 0.05
ms step, so that more minute welding work can be performed.
1
Displaying the MEMORY SWITCH Screen
(1) Turn OFF the CONTROL keyswitch and turn ON the MAIN POWER switch.
Power is supplied and the POWER lamp comes on. The screen of model name
appears.
(2) While the model name screen is displayed (for about 3 seconds), press the
corners of the touch panel display in the order shown in the figure above.
The INITIALIZE screen appears.
⇒ Unless the CONTROL keyswitch is OFF, the INITIALIZE screen is not displayed.
① ③
④ ②