Amada ML-2350A-CE, Руководство по эксплуатации, Страница: 61 / 235

INITIALIZE
Screen
When each of the screen selecting buttons is pressed:
When the power supply is turned ON with the CONTROL keyswitch OFF:
SCHED STATUS MON
SEAM PASSWD PRINT
MEMORY
SWITCH
Screen
MEMORY SWITCH
1. Setting Welding Schedules
61
ML-2350A/2351A
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Chapter 2
●
Various Settings
1. Setting Welding Schedules
This section explains the method of setting various laser welding schedules
by using the laser controller. The set schedules can be protected so that they
cannot be changed.
Welding Schedule Setting Screen
This section explains how to see the SCHEDULE, STATUS, MONITOR, SEAM,
and PASSWORD screens to set a welding schedule, and also the PRINTOUT
and INITIALIZE screens.
There are 6 types of basic screen as shown below which are displayed on the liquid
crystal display of the laser controller. Each screen is selected to perform each setting
by the button displayed on the screen.
Each time the screen selecting button arranged on the right side of each screen is
pressed, each of the SCHEDULE screen, STATUS screen, MONITOR screen, SEAM
screen, PASSWORD screen, and PRINTOUT screen appears in sequence from the
top. When laser light is output, the MONITOR screen is automatically displayed so
that the output energy can be checked.
To set the external communication function by using a PC or to switch each function,
display the INITIALIZE screen.
Operating Part
PRINTOUT
Screen
STATUS
Screen
MONITOR
Screen
SCHEDULE
Screen
SEAM
Screen
PASSWORD
Screen