Alvarion 43222600, Системное руководство

Страница: 22 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 2 - Base Station InstallationBase Station Connectors and LEDs
Chapter 2 - Base Station Installation Base Station Connectors and LEDs
12
2.5 Base Station Connectors and LEDs
For details on using the RST (Reset) button refer to “Using the Reset Button of the Base Station” on
page 112 .
For details on the functionality of the Status LEDs refer to “Base Station LEDs Description” on page 111 .
2.6 Preparing and Connecting the Outdoors Ethernet
Cable
It is recommended to attach the Ethernet connector to the cable and connect it to the base station prior
to mounting the outdoor unit. Typically the connector on the other side will be attached only after
completing the outdoor installation and routing the open-ended cable to the location intended for the
PoE Injector.
For detailed instructions on how to prepare the Ethernet cable refer to “Preparing the Base Station’s
Ethernet Cable” on page 116 .
Figure 2-1: Base Station Connectors and LEDs (a unit with both omni and sector antennas)
IMPORTANT
NOTE!
The USB connector does not function as a standard USB port and is intended for special engineering
purposes only. Ensure that the USB connector and RST button are properly sealed with the plastic cap.