Alvarion 43222600, Системное руководство

Страница: 91 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management Network
81
3.5.2.2.2.1.2 Mesh Mode Parameters
„
Mesh ID : The Mesh ID of the mesh network. Functionality is similar to that of SSID in regular Access
Point mode. All mesh network nodes must use the same Mesh ID.
„
Mesh Mode : The mesh node type. The available options are Root AP (RAP), Mesh AP (MAP) and
Root AP + Router Client.
The current (first wireless network in the radio) is always set to Mesh - Master (Access Point) mode.
The following wireless network(s), with the same Mesh ID, will be created automatically:
»
For Root AP mode: One additional wireless network (the second wireless network in the radio),
operating in Mesh - Monitoring mode (used for the batman-adv protocol).
»
For Root AP + Router Client: Two additional wireless networks will be created.
1
The second wireless network in the radio, operating in Mesh - Monitoring mode.
2
The third wireless network in the radio, operating in Router - Client mode (used for
connectivity to the backbone).
»
For Mesh AP: Two additional wireless networks will be created.
1
The second wireless network in the radio, operating in Mesh - Monitoring mode.
2
The third wireless network in the radio, operating in Mesh - Client mode.
Figure 3-59: Wireless Network Page, Interface Configuration Section, General Setup Tab
(Mesh Mode)
NOTE!
The configuration of the automatically created wireless network(s) cannot be modified.