Alvarion 43222600, Системное руководство

Страница: 75 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management Network
65
1
In the LAN page:
a
In the Common Configuration select the General Setup tab. Change the Protocol to DHCP client
(you will be requested to confirm the action by clicking on the Switch protocol button that will
become available).
b
In the Management Interface parameter drop-down list select the Management option.
c
Make sure that the Fallback IP parameters (see “Fallback IP” on page 69 ) are configured properly.
d
Click on the Save button.
2
In the Common Configuration section of the WAN page, select the Physical Settings tab. In the
Physical Settings tab select the No Interface option.
3
Click on Save & Apply to apply the changes.
3.5.1.2.3 Common Configuration
The Common Configuration section is available in all per interface pages.
The Common Configuration section includes the following tabs:
„
General Setup
„
Advanced Settings
„
Physical Settings
NOTE!
If Hotspot service is enabled (see “Hotspot General Settings Page” on page 54 , it must be disabled
before starting the process of switching from Router mode to Bridge mode.