WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management
Network
66
3.5.1.2.3.1
General Setup
The General Setup tab includes the following components:
Status
: A read-only display of the following details for the interface:
»
Uptime (if active)
»
MAC Address (not applicable for the AVLAN3316 interface)
»
RX (accumulated numbers for Bytes and Packets received on this interface since it became active)
»
TX (accumulated numbers for Bytes and Packets transmitted on this interface since it became
active)
»
IPv4 (the IP address of the interface)
Management Interface
: This parameter indicates whether the interface is configured as the
management interface. Only one interface can be defined as the Management interface. In all other
interfaces the configured option is No. To change the management interface, select the Management
option in the selected interface. Once applied, the configuration of this parameter in the previous
management interface will change automatically to No.
Figure 3-45: Network Per Interface Page, Common Configuration Section, General Setup Tab
(Static address Protocol)
Содержание 43222600
Страница 1: ...System Manual WBSn 2400 and WBSn 2450 Software Version 2 0 June 2015 P N 216066...
Страница 11: ...Chapter 1 Introduction In This Chapter WBSn System Description on page 2 Specifications on page 3...
Страница 127: ...Appendix B Preparing Ethernet Cables In this Appendix Preparing the Base Station s Ethernet Cable on page 116...