WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management
Network
69
Override MTU
: The maximum transmission unit (MTU), in bytes. The allowed range is from 1200 to
1500 bytes, the default being 1500. Unless required by the service provider, it is not recommended to
change this setting.
3.5.1.2.3.3
Physical Settings
The Physical Setting tab is available only for the WAN interface, enabling to select the physical interface
to be assigned to the WAN zone. For more details refer to
“Switching from Bridge Mode to Router
Mode and Vice Versa” on page 64
.
3.5.1.2.4
Fallback IP
The Fallback IP section is available only for the management interface when it is set to acquire IP
parameters from a DHCP server (Protocol parameter set to DHCP client).
NOTE!
If a VLAN interface is used for management, it is recommended to set the MTU to 1496 bytes.
Figure 3-48: Network Per Interface Page, Common Configuration Section, Physical Settings Tab
Figure 3-49: Network Per Interface Page, Fallback IP Section
Содержание 43222600
Страница 1: ...System Manual WBSn 2400 and WBSn 2450 Software Version 2 0 June 2015 P N 216066...
Страница 11: ...Chapter 1 Introduction In This Chapter WBSn System Description on page 2 Specifications on page 3...
Страница 127: ...Appendix B Preparing Ethernet Cables In this Appendix Preparing the Base Station s Ethernet Cable on page 116...