Alvarion 43222600, Системное руководство

Страница: 87 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management Network
77
„
MAC-Address : Displays the MAC address of the station’s radio.
„
Network : States the name of the wireless network (SSID / Mesh ID) to which the device is connected.
„
Signal : The total strength (in dBm) of the signal received from the station.
„
Signal/Chains : The strength of the signal received from the station per chain (the value of -95 dBm is
taken to mean "no antenna").
„
Noise : The received noise level at the AP.
„
TX Rate : The transmit bit rate from the AP towards this station.
„
RX Rate : Shows the receive bit rate at the AP from this station.
„
TX-CCQ : The transmission quality in % (a higher percentage means a better wireless connection
quality).
3.5.2.2 Wireless Network Page
A Wireless Network page is available for each configured wireless network.
The page title is “Wireless Network <Mode> <Network Name (SSID)> (<ath#>)”. In current release
Mode is always Master and ath# indicates the number of the wireless network interface, where # can be
from 0 to 5 for the 2.4 GHz radio (wifi0) and from 6 to 11 for the 5 GHz radio (wifi1).
„
From the management function selection panel, click on the relevant tab.
„
From the Wifi Wireless Overview page, click on the relevant Edit button.
„
From the Status Overview page, click on the SSID’s name in the Wireless section.
The Wireless Network page includes the following sections:
Figure 3-55: Wifi Wireless Overview Page, Associated Stations Section
To open the Wireless Network page for a specific wireless network: