Alvarion 43222600, Системное руководство

Страница: 95 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management Network
85
If the selected option is Deny all except listed , an association attempt by any device whose MAC
address is included in the MAC-List will be rejected. All devices with a MAC address that is not included
in the ACL are allowed to associate to the network.
If either Allow or Deny option is selected, you can define a list of MAC addresses that will be included in
the Allow/Deny list.
To add a MAC address to the list, click on the text field to open the drop-down list. The drop-down list
includes the MAC addresses of all devices currently connected to the wireless network, plus the
“--custom--” option. The --custom-- option enables manually adding a MAC address to the list, using
the format xx:xx:xx:xx:xx:xx (or for clearing the entry).
3.5.2.2.2.4 Advanced Settings
The parameters available in the Advanced Settings tab are:
„
Station Isolation : When Station Isolation is disabled (the default), wireless clients can communicate
with one another normally by sending traffic through the wireless network. When Station Isolation is
enabled, the device blocks communication between wireless clients on the same wireless network.
„
Maximum Stations : The maximum number of stations that can associate with the wireless network
(the default is 127, which is the maximum allowed).
3.5.3 VLANs Page
To access the VLANs page click on the Network>VLANs tab in the management function selection
panel.
Figure 3-63: Wireless Network Page, Interface Configuration Section, Advanced Settings Tab
NOTE!
In the current release, do not use VLANs when the unit is configured to operate in Router mode.