WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management
Network
88
1
Enter the host domain name for a local DNS server in the
Hostname
text field. Do not put www in
the domain name. For example: abcd.com is a valid domain name, www.abcd.com is not acceptable.
2
Click on the
IP address
text field to open the drop-down list for available IP addresses. The list
includes IP addresses of all potential candidates on your network, plus the “--custom--” option. The
--custom-- option enables manually adding an IP address to the list. Select the appropriate IP address
or enter it manually.
3.5.5
Diagnostics Page
To access the Network Diagnostics page click on the
Network>Diagnostics
tab in the management
function selection panel.
The Diagnostics enables using the following diagnostic tools:
To configure the parameters of a new host name or to modify an existing entry:
NOTE!
The IP address of the AP should be configured as the preferred DNS server in the devices in your
network in order to interpret these custom hostname(s).
Figure 3-66: Network Diagnostics Page
Содержание 43222600
Страница 1: ...System Manual WBSn 2400 and WBSn 2450 Software Version 2 0 June 2015 P N 216066...
Страница 11: ...Chapter 1 Introduction In This Chapter WBSn System Description on page 2 Specifications on page 3...
Страница 127: ...Appendix B Preparing Ethernet Cables In this Appendix Preparing the Base Station s Ethernet Cable on page 116...
