Alvarion 43222600, Системное руководство

Страница: 41 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementStatus
Chapter 3 - Base Station Management Status
31
For each of the available radio cards the following details for each of the configured wireless networks
(SSIDs) are displayed:
„
SSID / Mesh ID : The name (Service Set IDentifier) of the wireless network. Click on the link to open
the relevant Wireless Network configuration page.
„
Mode : The operation mode of the wireless network.
„
Channel : Shows the channel number and frequency that the AP is using.
„
Bitrate : This is the maximum bitrate supported by the radio in the current configuration. Not
applicable for a Mesh-Monitoring wireless network.
„
MAC-Address : Applicable only for a Mesh-Client wireless network. The MAC address of the
associated device.
„
BSSID : The Basic Service Set IDentifier. Not applicable for a Mesh-Monitoring wireless network.
„
Encryption : The wireless encryption mode being used for the wireless network. Not applicable for a
Mesh-Monitoring wireless network.
„
ACK Timeout : Shows the maximum acknowledgment time in microseconds (derived from the value
configured for the Distance parameter). Not applicable for a Mesh-Monitoring wireless network.
„
DFS Status : Indicates whether DFS (Dynamic Frequency Selection) is activated to properly support
applicable regulations for the configured Regulatory Domain/Country (applicable only for the 5 GHz
band). When DFS is enabled, the AP automatically switches channel if radar is detected on the current
channel. Not applicable for a Mesh-Monitoring wireless network.
„
TX-CCQ : The uplink transmission quality in % (a higher percentage means a better wireless
connection quality). Applicable only for a Mesh-Client wireless network.
Table 3-1: Radio Operation Mode / Status
Icon Description
Regular Access Point
Radio is disabled
Mesh Root Access Point
Mesh Access Point
INFORMATION
For more details on Wireless parameters refer to “Wireless Network Page” on page 77 .