background image

WBSn-2400 and WBSn-2450 System Manual

Chapter 3 - Base Station ManagementServices

Chapter 3 - Base Station Management

Services

54

3.4.1.1.3

Test Internet Connection

At this point, before setting up the hotspot, it is recommended to test the Internet connection by 

connecting a mobile phone or any other device to a wireless network in the LAN zone of the hotspot AP 

and use a browser to perform an Internet search. If search results are returned, this means that the 

Internet connection is working fine.

3.4.1.1.4

Setting up the Hotspot

The hotspot can now be set up and enabled. The following sections describe the Hotspot settings 

available in the AP's web pages.

3.4.1.2

Hotspot General Settings Page

To access the Hotspot General Settings page click on the 

Services>Hotspot

 tab in the management 

function selection panel.

The Hotspot General Settings page includes the following parameters:

„

Enable Hotspot

: Select to activate the hotspot service. It is recommended to enable the hotspot 

service after competing all necessary settings as described in 

“Introduction to Hotspot Services” on 

page 53

.

Figure 3-36: Hotspot General Settings Page

Содержание 43222600


































































































































Отзывы: