WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementServices
Chapter 3 - Base Station Management
Services
53
3.4
Services
The Services tab provides access to the following:
3.4.1
Hotspot Service Pages
The Hotspot service allows you to control the access and usage of the Internet by connected devices.
This section includes:
Introduction to Hotspot Services
3.4.1.1
Introduction to Hotspot Services
The following subsections contain guidelines on how to configure the device to implement hotspot
services. It is recommended to configure the LAN, Wifi, and WAN, then test it before enabling the
hotspot setting:
3.4.1.1.1
WAN/LAN Interfaces
To support Hotspot services configure the device to operate in Router mode. Refer to
Bridge Mode to Router Mode and Vice Versa” on page 64
.
3.4.1.1.2
Wifi Settings
The wireless networks that should be available for hotspot services should be set up to allow any user to
access the Internet, assuming that the hotspot is not yet enabled. This means:
ESSID should not be hidden (see
Hide ESSID
).
Wireless Security
mode should be set to No Encryption (see
“Wireless Security” on page 82
).
Содержание 43222600
Страница 1: ...System Manual WBSn 2400 and WBSn 2450 Software Version 2 0 June 2015 P N 216066...
Страница 11: ...Chapter 1 Introduction In This Chapter WBSn System Description on page 2 Specifications on page 3...
Страница 127: ...Appendix B Preparing Ethernet Cables In this Appendix Preparing the Base Station s Ethernet Cable on page 116...