Alvarion 43222600, Системное руководство

Страница: 92 / 129

WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementNetwork
Chapter 3 - Base Station Management Network
82
3.5.2.2.2.2 Wireless Security
The Wireless Security tab enables setting the following:
„
Encryption Mode and Parameters
„
Passpoint Parameters
3.5.2.2.2.2.1 Encryption Mode and Parameters
The selected Encryption option and relevant parameters define the methods to be used for
authentication of client devices and for protecting the information transferred over the wireless link. The
available options are:
„
No Encryption
„
WEP Open System
„
WEP Shared Key
„
WPA-PSK
„
WPA2-PSK
„
WPA-PSK/WPA2-PSK Mixed Mode
„
IEEE802.1X/WPA-EAP
„
IEEE802.1X/WPA2-EAP
No Encryption : No authentication, no encryption of over the air information. This is the default mode
that should typically be used for testing purposes or for enabling any client to connect with the AP (e.g.
to support Hotspot services).
WEP : Wired Equivalent Privacy (WEP) is the oldest and least secure encryption algorithm. In 2004 the
IEEE declared that both WEP-40 and WEP-104 "have been deprecated as they fail to meet their security
goals”. Stronger encryption using WPA or WPA2 should be used where possible.
The same shared WEP key must be configured in both side of the wireless link, and is used for both
authentication and encryption of over the air traffic.
Figure 3-60: Wireless Network Page, Interface Configuration Section, Wireless Security Tab