WBSn-2400 and WBSn-2450 System Manual
Chapter 3 - Base Station ManagementServices
Chapter 3 - Base Station Management
Services
56
The parameters that become available when Auto Config is disabled are:
Network Address: The default address and netmask prefix are derived from the network address of
the LAN interface.
DNS Server 1
and
DNS Server 2
: The default for both is the management IP address of the AP.
3.4.1.4
Hotspot RADIUS Page
To access the Hotspot RADIUS page click on the
Services>Hotspot>RADIUS
tab in the management
function selection panel.
Figure 3-38: Hotspot Network Page (Auto Config Disabled)
Figure 3-39: Hotspot RADIUS Page
Содержание 43222600
Страница 1: ...System Manual WBSn 2400 and WBSn 2450 Software Version 2 0 June 2015 P N 216066...
Страница 11: ...Chapter 1 Introduction In This Chapter WBSn System Description on page 2 Specifications on page 3...
Страница 127: ...Appendix B Preparing Ethernet Cables In this Appendix Preparing the Base Station s Ethernet Cable on page 116...
