ENGLISH
5V
RESET
1A
INTERNET
1
2
LAN
3
4
5V
RESET
1A
INTERNET
1
2
LAN
3
4
DIR-605L
If any of the above items are missing, please contact your reseller.
DIR-605L Wireless N300 Cloud Router
Power Adapter
Ethernet Cable
Quick Install Guide
1
Power LED
A solid green light indicates a proper connection to the
power supply.
2
Internet LED
A solid green light indicates a proper connection to
your broadband modem. The light will blink during data
transmission.
3
WPS LED
The light will blink during the WPS process.
4
Wireless LED
A solid green light indicates that the wireless segment is
ready. The light will blink during data transmission.
5
LAN LEDs (1-4) A solid green light indicates a connection to an Ethernet
device. The LED will blink during data transmission.
6
WPS Button
Press to start the WPS process. The WPS LED will start to blink.
7
LAN Ports (1-4) Connect Ethernet devices such as computers, switches,
and game consoles.
8
Internet Port
Connect your broadband modem to this port using an
Ethernet cable.
9
Power Port
Connect the supplied power adapter.
10
Reset Button
Press and hold the reset button with a paper clip for six
seconds to reset the router to the factory default settings.
1
3
5
7
8 9
1
Unplug the power to your DSL or Cable modem.
2
Connect an Ethernet cable from the Internet port of the router to the
Ethernet port on your DSL or Cable modem.
3
Connect another Ethernet cable from the Ethernet port on your computer
to one of the LAN ports on the router.
4
Plug the power back into your DSL or cable modem. Please wait about one
minute before continuing.
5
Plug the power adapter into your router and connect to an available power
outlet or surge protector.
Modem
DIR-605L
Computer
Modem
DIR-605L
Computer
Package Contents
Hardware Overview
Minimum Requirements
Connect your Router
5V
RESET
1A
INTERNET
1
2
LAN
3
4
6
After the router has powered up, verify that the Power and Internet LEDs are
both lit then continue with the
Configuration
section on the other side.
Modem
DIR-605L
Computer
5V
RESET
1A
INTERNET
1
2
LAN
3
4
4
T
R
Modem
DIR-605L
Ethernet Port
Ethernet Cable
Internet Port
Ethernet Cable
•
Users with DSL providers
- If you are using a PPPoE connection, you will need
your PPPoE user name and password. If you do not have this information, contact
your Internet provider. Do not proceed until you have this information.
•
Users with Cable providers
- Make sure you unplug the power to your modem.
In some cases, you may need to turn it off for up to 5 minutes.
•
Advanced Users
- If your ISP provided you with a modem/router combo, you will
need to set it to “bridge” mode so the DIR-605L router can work properly. Please
contact your ISP or refer to the user manual for your modem/router device.
Before you Start
Network Requirements:
• An Ethernet-based broadband modem
Web-based Configuration Requirements:
Computer with the following:
• Windows® or Mac OS® X operating system
• An installed Ethernet adapter or wireless adapter
Supported Browsers:
• Internet Explorer 7 or higher
• Safari 4 or higher
• Chrome
• Firefox
mydlink Requirements:
• iPhone/iPad/iPod Touch (iOS 3.0 or higher)
• Android device (1.6 or higher)
• Web Browser Requirements:
• Internet Explorer 7 or higher
• Safari 5 or higher
• Chrome
• Firefox
Note:
To learn more about mydlink, visit
http://www.mydlink.com
.
If you experience issues registering this Router with your mydlink account, try
performing a hard reset by using an unfolded paperclip to press and hold the reset
button for 10 seconds while the Router is powered on. This may be necessary if you
have purchased an open box or resold unit.
2
10
6
Wireless N300
Cloud Router
4
