Alutech CU-TR230-868, Инструкция по установке и эксплуатации

Страница: 6 / 130

CONTROL UNITS СU-TR230-868 / СU-TR400-868
4 4
PROdUCT dESCRIPTION
Monthly verify the operation of safety devices (safety edge, photocells, STOP devices, stopping
the movement and others). Malfunction and faulty operation of safety devices can result in injury.
The product is not intended for use in acidic, salty or explosive atmospheres, on evacuation
routes and emergency exits.
Foreign objects, materials from construction works, water or other liquid should not be inside
the product and other electrical devices of the drive system. Operation of equipment in this
condition is prohibited.
Sources of heat and open flames must be removed a sufficient distance from the product.
Violation of this requirement can lead to damage to the product, cause its malfunction, lead to
dangerous situations.
The product as part of the drive system must be serviced regularly to ensure efficient and safe
operation. Maintenance and repairs must be documented by the persons performing them, and
the owner must keep these documents.
Do not use the product if repairs are required!
2. PROdUCT dESCRIPTION
Control units CU-TR series are designed to control and manage the devices of the drive system
of industrial sectional doors. Direct application is operation control of drives TR series * :
CU-TR230-868 : TR-3531-230, TR-5024-230, TR-3531-230E, TR-5020-230E, TR-5024-230E
CU-TR400-868
: TR-5024-400, TR-10024-400, TR-13018-400, TR-5013-400E, TR-5020-400E,
TR-5024-400E, TR-10024-400E, TR-13018-400E, TR-13012-400E
The drive system is a set of devices (electric drive, electric control unit, safety, control, alarm
devices, sensors) that control the door movement and ensure the safe operation of doors.
2.1 dELIVERy KIT
The delivery kit is shown in fig. 1.
Y
After receiving the product, make sure that the kit is complete and that the kit components are
not visibly damaged. In case of discrepancies, contact the supplier.
* Drives with encoder are with the designation E.
Drives with mechanical end position switches are without designation E.