Alutech CU-TR230-868, Инструкция по установке и эксплуатации

Страница: 29 / 130

CONTROL UNITS СU-TR230-868 / СU-TR400-868
27 27
SETTINGS
6.5 CyCLE COUNTER daTa
Y
The number of completed cycles in a six-digit form is displayed in the setting when changing
the display inscription (maximum 999,999 cycles).
The example shows the counter value 123 456 cycles: .
Table 16
1
Press and hold for ~5 s, until entering the setting menu
5 s
2
After the inscription
P1
appears, press
3
After the inscription P0 appears, press
4
After the inscription f0 appears, press
5
After the inscription f1 appears, press
6
The display will show two digits with two dots (for example, 1. 2. ).
These are the first two digits of the counter.
In order to see the next two digits of the counter (third and fourth)
press
7
The display will show the next two digits with one dot in the middle
(for example, 3. 4 ).
In order to see the last two digits of the counter (fifth and sixth)
press
8
The display will show the last two digits with one dot at the end
(for example, 5 6. ).
Using or it is possible to see the counter digits again
9
To exit the setting menu, press 3 times
×3