Alutech CU-TR230-868, Инструкция по установке и эксплуатации

Страница: 16 / 130

CONTROL UNITS СU-TR230-868 / СU-TR400-868
14 14
SETTINGS
6.2.1. REMOTE CONTROL RECORdING
Y
If you record a previously recorded remote control, the remote control button or buttons will
be rerecorded with new control commands!
no — when recording remotes, the inscription means that the maximum number of remotes
is recorded.
f1 — Recording any button of the remote control with the control command STEP By STEP
By default, the value
01
( tab. 4) is STEP-BY-STEP (ENTRY).
f2 — Recording three buttons of the remote control with the control commands:
OPEN (button b1 ), STOP (button b2 ), CLOSE (button b3 ). The default for
OPEN the value
02
( tab. 4) is OPEN (EXIT).
Table 5
1
Enter the setting menu ( tab. 3) and select menu P2 .
Select the setting
f1
or
f2
. After the inscription of desired setting appears,
press
2
The display will show the inscription
rc
, which means waiting for the remote
control signal
3
Press on the remote control 3 times (at least):
• for setting
f1 , the selected control button;
• for setting f2 any button
×3
4
The indicator will automatically show:
•
number without a dot , that is proposed to be assigned to an unrecorded
remote in the drive memory (using
or
the number can be
chosen from the available);
• number with a dot . The remote control has already been recorded
and after confirmation, a complete rerecording of the remote control
commands with the specified number will be performed!
5
Press to confirm the record; after pressing there will be a number
with a dot on the indicator
6
After ~ 2 s, an automatic transition to recording the next remote will occur
(repeat steps 3 to 5).
Press the button 3 times to exit the setting menu
×3