Altigen AltiWare OE/ACC Version 5.0, Руководство администратора

Страница: 350 / 470

12-2 AltiWare OE System Installation & Administration Manual
After creating the IP extensions, you can set the following parameters:
Parameter Description
Soft Key 1 - 10 Corresponds to the 10 soft keys on the Alti-IP 600. Use the
drop down list to assign one of the following functions to the
desired keys:
• N/A - when selected, the corresponding soft key cannot
be used.
• BLF (Busy Lamp Field) - when selected, enter an
extension number in the field below; this will be
associated with the corresponding soft key to
automatically dial this extension number; the button light
next to this soft key indicates that the extension number
is busy. You can select the Play Beep Tone check box to
also have the IP phone play an audible beep or one of 6
different ring tones when the extension number is
ringing.
Note: The BLF feature can only be assigned to
internal extension numbers, not outside numbers.
• Feature Code - when selected, enter an AltiServ feature
code in the field below; this will be associated with the
corresponding soft key to dial this feature code.
• Speed Dial - when selected, enter the speed dial code in
the field below; this will be associated with the
corresponding soft key to dial this speed dial code.
• Line Park - when selected, use the drop-down list to the
desired Line Park line ID.
• Phone Setting - when selected, the IP phone user will be
able to program the corresponding soft key, as a speed
dial or feature code key, directly from the IP phone (using
* * 6, then ENTER).
Note: Upon initial installation, the lower left soft key is set
up as FLASH by default. This key can be re-assigned
in AltiAdmin, using the AltiGen IP Phone
Configuration window. No other soft keys can be
configured to FLASH. All other soft keys are
initially defaulted to Phone Setting.