Altigen AltiWare OE/ACC Version 5.0, Руководство администратора

Страница: 346 / 470

System Requirements
11-2 AltiWare OE System Installation & Administration Manual
System Requirements
Server
• AltiWare OE 4.5A or higher
• Triton VoIP board(s)—one VoIP port per simultaneous IP extension
user is required.
• High-speed WAN connectivity to support remote users (minimum
64kbps per remote user)
• Static IP address assigned to each extension configured for an IP
connection (recommended, but not required)
Client
• An AltiGen-certified IP phone device (see “Clients” on page 11-3 for
details)
• High-speed data connection to the AltiServ system (minimum 64kbps)
Configuration
You must configure AltiAdmin and, in some cases, your client hardware or
software for using IP extensions.
AltiAdmin
1. Ensure that the VoIP settings are configured properly and work.
For details on configuring the Triton VoIP board and the IP trunks,
refer to “Configuring the Triton VoIP Board” on page 6-7 and “Setting
General Trunk Attributes” on page 7-3.
2. Ensure that you can make calls over IP by creating an entry (at least an
entry with the IP address of the AltiServ system) in the IP dialing table
and then dialing <IP Trunk access code> + <IP dialing table entry
code> + <extension number>. Make sure you can have a two-way
conversation on this VoIP call.
For details on using the IP dialing table, see “Defining an IP Dialing
Table” on page 5-27. Also see “Setting VoIP Codecs” on page 10-12.