manualshive.com logo in svg

Altigen ACC 6.7, Руководство администратора, Страница: 80 / 462

Поделиться
Скачать
Altigen ACC 6.7 Скачать руководство пользователя страница 80

Chapter 4:  System Configuration

66

  MAXCS ACC 6.7 Administration Manual

Activity

The 

Activity

 configuration tab is used to configure activity codes that can be displayed 

at AltiConsole when the extension user is absent. MaxCommunicator users, MaxAgent 
users, and AltiGen IP phone users can select from these activity codes to let others know 
where they are when they are away from their desks (meeting, business travel, etc.). 
A greeting associated with the activity can be recorded and played to the caller. When 
the user changes the Activity, the extension’s greeting is also automatically changed to 
the greeting associated with this activity.
To access 

Activity 

configuration, select 

System > System Configuration

, then click 

the 

Activity 

tab.

There are a total of nine activity codes; the first six are pre-configured as follows:

1 - System Default (plays the system greeting)
2 - Personal (plays the personal greeting)
3 - Meeting
4 - Away From Desk
5 - Business Travel
6 - Personal Time Off

The remaining three activity codes (7, 8, 9) are not assigned and can be customized by 
the administrator. To customize an activity code, click the activity code and click 

Edit

.

In the 

Edit Activity

 dialog box, enter name of the Activity and click 

OK

.

Feature Profiles

Select 

System > System Configuration

, then click the 

Feature Profiles

 tab to 

configure feature profiles.

Содержание ACC 6.7















































































































































































































































































































































































































































































Отзывы:

Нет отзывов