Altigen ACC 6.7 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 462

Altigen ACC 6.7 Скачать руководство пользователя страница 2

NOTICE

: While every effort has been made to ensure accuracy, AltiGen Communications, Inc., will not

be liable for technical or editorial errors or omissions contained within the documentation. The
information contained in this documentation is subject to change without notice.
This documentation may be used only in accordance with the terms of the AltiGen Communications, Inc.,
License Agreement.

MAX Communication Server, MaxAdministrator, MaxCommunicator, MaxAgent, MaxSupervisor,
MaxOutlook, MaxInSight, MaxCall, Enterprise Manager, AltiServ, AltiLink, AltiConsole, VRPlayer,
Zoomerang, IPTalk, Alti-Mobile Extension, InTouch Dialer, AltiReport, and SuperQ are trademarks or
registered trademarks of AltiGen Communications, Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective manufacturers.
AltiGen's products are protected under one or more of the following U.S. patents, with other U.S. patents
pending: 6532230; 6192344; 6292549; 6493439; 6909780; 6738465; 6754202; 6766006; 6928078;
6909709; 6956848; 7058047; 7013007; 7027578; 7280649; 7308092.

AltiGen Communications, Inc.
410 East Plumeria Dr.
San Jose, CA 95134
Telephone: 888-AltiGen (258-4436)
Fax: 408-597-9020
E-mail: [email protected]
Web site: www.altigen.com

Copyright © AltiGen Communications, Inc. 2011. All rights reserved.

«
1
2
3
4
...
»

Содержание ACC 6.7















































































































































































































































































































































































































































































Отзывы:

Нет отзывов