11
Chapter 2
Network Connection
Before you start:
If you want to set the network camera via a LAN (Local Area Network),
please refer to
Section 2.1
Setting the Network Camera over the
LAN
.
If you want to set the network camera via a WAN (Wide Area
Network), please refer to
Section 2.2
Setting the Network Camera
over the WAN
.
2.1
Setting the Network Camera over the
LAN
Purpose:
To view and configure the camera via a LAN, you need to connect the
network camera in the same subnet with your computer, and install the
SADP or ALL-VMS software to search and change the IP of the network
camera.
Note:
For the detailed introduction of SADP, please refer to Appendix 1.
2.1.1
Wiring over the LAN
The following figures show the two ways of cable connection of a
network camera and a computer: