© ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
Irrtum und Änderungen vorbehalten
80
Figure 6-44
Video Tampering Alarm
2.
Check
Enable Video Tampering
checkbox to enable the video
tampering detection.
3.
Set the video tampering area; refer to
Task 1
Set the Motion
Detection Area
in
Section 6.6.1.
4.
Click
Edit
to edit the arming schedule for video tampering. The
arming schedule configuration is the same as the setting of the arming
schedule for motion detection. Refer to
Task 2
Set the Arming Schedule
for Motion Detection
in
Section 6.6.1.
5.
Check the checkbox to select the linkage method taken for the video
tampering. Audible warning, notify surveillance center, send email and
trigger alarm output are selectable. Please refer to
Task 3
Set the Alarm
Actions for Motion Detection
in
Section 6.6.1.
6.
Click
Save
to save the settings.
6.6.3
Configuring Alarm Input
Steps:
1.
Enter the Alarm Input Settings interface:
