© ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
Irrtum und Änderungen vorbehalten
84
3.
Click on the line, and you will see two red squares on each end,
drag one of the red squares to define the arming area.
Figure 6-48
Draw Crossing Line
And you can select the directions as A<->B, A ->B, and B->A.
A<->B
: Only the arrow on the B side shows; when an object going across
the plane with both direction can be detected and alarms are triggered.
A->B
: Only the object crossing the configured line from the A side to the
B side can be detected.
B->A
: Only the object crossing the configured line from the B side to the
A side can be detected.
4.
Set the sensitivity [1~100].
5.
Choose another line crossing on the dropdown list to configure.
Up to 4 line crossing areas are configurable.
6.
Click
Save
to save the settings.
