© ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
Irrtum und Änderungen vorbehalten
82
6.6.4
Configuring Alarm Output
Steps:
1.
Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2.
Select one alarm output channel in the
Alarm Output
drop-down list.
You can also set a name for the alarm output (optional).
3.
The
Delay
time can be set to
5sec,
10sec,
30sec,
1min,
2min,
5min,
10min
or
Manual
.
The delay time refers to the time duration that the
alarm output remains in effect after alarm occurs.
4.
Click
Edit
to enter the
Edit Schedule Time
interface. The time
schedule configuration is the same as the settings of the arming schedule
for motion detection Refer to
Task 2
Set the Arming Schedule for
Motion Detection
in
Section 6.6.1.
5.
You can copy the settings to other alarm outputs.
6.
Click
Save
to save the settings.