© ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
Irrtum und Änderungen vorbehalten
66
Day:
the camera stays at day mode.
Night:
the camera stays at night mode.
Auto:
the camera switches between the day mode and the night mode
according to the illumination automatically. The sensitivity ranges from
0~7, the higher the value is, the easier the mode switches. The filtering
time refers to the interval time between the day/night switch. You can set
it from 5s to 120s.
Schedule:
Set the start time and the end time to define the duration for
day/night mode.
Triggered by alarm input:
The switch is triggered by alarm input, and
you can set the triggered mode to day or night.
Smart IR
gives user an option to turn ON / OFF the IR LED.
Set the smart IR to
ON
, and Auto and Manual are selectable for IR mode.
Select AUTO, and the IR LED changes according to the actual luminance.
E.g.: if the current scene is bright enough, then the IR LED adjusts itself to
lower power; and if the scene is not bright enough, the IR LED adjusts
itself to higher power.
Select Manual, and you can adjust the IR LED by adjusting the distance.
E.g.: If the object is near the camera, the device adjusts the IR LED to lower
power, and the IR LED is in higher power if the object is far.
Backlight Settings
BLC
: If you focus on an object against strong backlight, the object will be
too dark to be seen clearly. BLC compensates light to the object in the
front to make it clear. OFF, Up, Down, Left, Right, Center and customize
are selectable.
WDR
: Wide Dynamic Range can be used when there is a high contrast of
the bright area and the dark area of the scene.
HLC
: High Light Compression function can be used when there are strong
lights in the scene affecting the image quality.
