© ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
Irrtum und Änderungen vorbehalten
42
Enable the
Manual Time Sync
function and then click
to set the
system time from the pop-up calendar.
Note:
You can also check the
Sync with computer time
checkbox to
synchronize the time of the camera with that of your computer.
Figure 6-4
Time Sync Manually
Click the
DST
tab page to enable the DST function and Set the date of
the DST period.
Figure 6-5
DST Settings
2. Click
Save
to save the settings.
6.3
Configuring Network Settings
6.3.1
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the
camera over network. The camera supports both the IPv4 and IPv6. Both
versions may be configured simultaneously without conflicting to each
other, and at least one IP version should be configured.
Steps:
1.
Enter TCP/IP Settings interface:
Configuration > Basic Configuration >
Network > TCP/IP
