© ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
Irrtum und Änderungen vorbehalten
27
Purpose:
The setting of the wireless network connection is never easy. To avoid the
complex setting of the wireless connection you can enable the WPS
function.
WPS (Wi-Fi Protected Setup) refers to the easy configuration of the
encrypted connection between the device and the wireless router. The
WPS makes it easy to add new devices to an existing network without
entering long passphrases. There are two modes of the WPS connection,
the PBC mode and the PIN mode.
Note:
If you enable
the WPS function, you do not need to configure the
parameters such as the encryption type and you don’t need to know the
key of the wireless connection.
Steps:
Figure 4-10
Wi-Fi Settings - WPS
PBC
Mode:
PBC refers to the Push-Button-Configuration, in which the user simply has
to push a button, either an actual or virtual one (as the
button
on the configuration interface of the IE browser), on both the Access Point
(and a registrar of the network) and the new wireless client device.
1.
Check the checkbox of
to enable WPS.
2.
Choose the connection mode as PBC.
