© ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
Irrtum und Änderungen vorbehalten
28
Note:
Support of this mode is mandatory for both the Access Points and
the connecting devices.
3.
Check on the Wi-Fi router to see if there is a WPS button. If yes push
the button and you can see the indicator near the button start flashing,
which means the WPS function of the router is enabled. For detailed
operation, please see the user guide of the router.
4.
Push the WPS button to enable the function on the camera.
If there is not a WPS button on the camera, you can also click the virtual
button to enable the PBC function on the web interface.
5.
Click
Connect
button.
When the PBC mode is both enabled in the router and the camera, the
camera and the wireless network is connected automatically.
PIN Mode:
The PIN mode requires a Personal Identification Number (PIN) to be read
from either a sticker or the display on the new wireless device. This PIN
must then be entered to connect the network, usually the Access Point of
the network.
Steps:
1.
Choose a wireless connection on the list and the SSID is shown.
