© ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
Irrtum und Änderungen vorbehalten
83
Figure 6-46
Alarm Output Settings
6.6.5
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP
address conflicted and illegal login to the cameras.
Steps:
1.
Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2.
Check the checkbox to set the actions taken for the Exception alarm.
Refer to
Task 3
Set the Alarm Actions Taken for Motion Detection
in
Section 6.6.1.
Figure 6-47
Exception Settings
3.
Click
Save
to save the settings.
6.6.6
Configuring Line Crossing Detection
This function can be used for detecting people, vehicles and objects
crossing a pre-defined area. The line crossing direction can be set as
bidirectional, from left to right or from right to left. And a series of
linkage method will be triggered if any object is detected.
Steps:
1.
Check the
Enable Line Crossing Detection
checkbox.
2.
Click the
Draw Area
, and a crossing plane will show on the image.
