Alfa Romeo Tonale, Руководство пользователя

Страница: 231 / 296

229
ENGINE OIL
197) 81)
Check that the oil level is between the
MIN and MAX references on the dipstick
(1). If the level of the oil is close to or
below the MIN mark, add oil via the filler
fitting (2) until the MAX mark is reached.
The engine oil level dipstick (1) is integral
with the cap (2). Unscrew the cap, clean
the dipstick with a lint-free cloth,
reinsert the dipstick and screw the cap
back on.
Unscrew the plug again and check that
the engine oil level is between the MIN
and MAX marks on the dipstick.
When the operation is complete, screw in
the cap/dipstick correctly.
Engine oil consumption
82) 6)
The maximum engine oil consumption
is usually 400 grams every 1000 km.
During the initial period of use the engine
oil consumption conditions should be
considered as having stabilised after the
first 5000 - 6000 km.
HEAT ENGINE COOLANT
198) 83)
If the level is too low, unscrew the cap
(3) of the reservoir and add the fluid
described in the "Refilling" chapter in the
“Technical Specifications” section.
AUXILIARY BATTERY COOLING
SYSTEM FLUID
(Mild Hybrid versions)
The level of the auxiliary battery system
coolant must be checked when the
engine is cold and must be between the
MIN and MAX marks on the reservoir (4)
fig. 230.
If the level is below the MIN level, go to
an Alfa Romeo Dealership.
Do not attempt to open the cap fig. 231
yourself to avoid burns and/or damage
to the cooling system and electronic
components. Topping up and filling
operations must be carried out by
qualified personnel at an Alfa Romeo
Dealership using the appropriate
equipment for vacuum filling.
4
230
9650314
231
9650315
WINDSCREEN/REAR WINDOW
WASHER FLUID
199) 200)
If the level is low, lift the cap (4) of the
reservoir and add the fluid described in
the “Refilling” chapter of the "Technical
Specifications" section.
BRAKE FLUID
201) 202) 84)
Check that the fluid is at the max. level.
If the fluid level in the reservoir is low,
unscrew the cap (5) of the reservoir and
add the fluid described in the “Refilling”
chapter of the "Technical Specifications"
section.