Alfa Romeo Tonale, Руководство пользователя

Страница: 65 / 296

63
NOTE When the ignition device is moved
from STOP to the ENGINE, the last
screen displayed before the previous
engine shutdown is shown.
NAVIGATION BETWEEN SCREENS
Press the button (2) fig. 82 and turn the
ring (1) up or down to scroll through the
screens.
82
9650288
If the selected screen permits, press the
ring to access the submenus (1).
SPEEDOMETER
The following information fig. 83 is
displayed on this screen
(1) Instantaous speed in km/h or mph.
Press the ring (1) fig. 78 to switch
between km/h and mph scales.
(2) Driving modes
(3) Messages
(4) Engaged gear and GSI (Gear Shift
Indicator) shift suggestions
83
9650062
NAVIGATION
This screen repeats the instructions
provided by the Alfa Connect system
(fig. 84).
Zoom changes made on the Alfa
Connect system are not automatically
repeated on the instrument panel
display screen. Turn the ring up/down
(1) fig. 78 to increase/decrease the
zoom on this screen. Press the ring to
go back to the initial frame. The zoom
level is automatically reset to the
factory settings whenever the engine is
restarted.
1
84
9650063
If the function is activated through the
Alfa Connect system settings, the Alfa
Connect system navigator indications
are also repeated within the right dial
of the display (1) fig. 85 using turn by
turn navigation (see the chapter "Alfa
Connect system" in the "Multimedia"
section). The following information is
shown:
(1) Direction indicators
(2) Distance to next change of direction
(in km or miles, depending on instrument
panel settings)
(3) Suggested lanes
(4) Address of the road to be followed
after the change of direction
Press and hold the ring (1) fig. 78 to
disable the indications in the right-hand
ring for the current navigation.