Alfa Romeo Tonale, Руководство пользователя

Страница: 161 / 296

159
The device detects the direction of
traffic automatically when the car
passes from left-hand traffic to right-
hand traffic.
RECALLING THE SPEED
Once the system has been cancelled
but not deactivated, if a speed was
previously set simply press the RES
button and remove your foot from the
accelerator to recall it.
The system will be set to the last stored
speed.
Before returning to the previously set
speed, bring the speed close to that
value, then press the RES button and
release it.
WARNING The recall function must only
be used if the road and traffic conditions
so allow. Recalling an excessively high
or low speed for the current traffic
and road conditions could cause an
acceleration or a deceleration of the car.
Failure to comply with these precautions
may cause serious accidents and fatal
injuries.
SETTING THE DISTANCE BETWEEN
CARS
The distance between your car and the
vehicle ahead may be set to 1 bar (short),
2 bars (medium), 3 bars (long), 4 bars
(maximum) (2) fig. 158.
When the dedicated screen is not shown
on the display, the set distance is shown
via the graphics (2) fig. 159.
The distances from the vehicle ahead are
proportional to speed.
The interval of time with respect to
the vehicle ahead remains constant
and varies from 1 second (for the short
distance 1-bar setting) to 2 seconds (for
the maximum distance 4-bar setting).
The setting is 4 (maximum) the first time
the device is used. After the distance
has been modified by the driver, the new
distance will be stored also after the
system is deactivated and reactivated.
Changing the speed
Press and release the button to adjust
the distance setting (2) fig. 157.
The distance setting decreases by one
bar (shorter) every time the button is
pressed.
The set speed is held if there are no cars
ahead. Once the shortest distance has
been reached, a further press of the
button will set the longest distance.
If a vehicle is detected ahead in the same
lane, travelling at slower speed, an icon
appears on the display (where provided).
The device will automatically adjust the
car speed to hold the distance setting
regardless of the set speed.
The car holds the set distance until:
the vehicle ahead accelerates to a
speed higher than the set speed
the vehicle ahead leaves the lane
or the detection field of the Adaptive
Cruise Control device sensor
the distance setting is changed
the Adaptive Cruise Control device is
deactivated/cancelled
WARNING The maximum braking applied
by the device is limited. The driver may
apply the brakes in all cases if needed.
WARNING If the device predicts that
the braking level is not sufficient to hold
the set distance, the driver is warned
by a message on the display, indicating
that the vehicle ahead is too close. An
acoustic warning is also emitted. In this
case, it is advisable to brake immediately
as necessary to hold a safe distance from
the vehicle ahead.
WARNING The driver is responsible for
ensuring that there are no pedestrians,
other cars or objectives along the
direction of the car. Failure to comply
with these precautions may cause
serious accidents and injuries.
WARNING The driver is fully responsible
for holding a safe distance from the
vehicle ahead respecting the highway
code in force in the respective country.