Alfa Romeo Tonale, Руководство пользователя

Страница: 35 / 296

33
light switch should be turned to with
the dipped beam headlights on, or it
should be turned to position
.
To flash, the unstable position is used
(activate by pulling the lever towards
you). With main beam headlights on, the
warning light
on the instrument panel
will come on at the same time.
The main beam headlights is switched off
by pushing the left lever in the direction
of travel in the toggle position. Warning
light
switches off in the instrument
panel.
When the speed is higher than 40 km/h
and the function is active, the lights
switch off if the stalk is pushed n the
direction of travel in the toggle position
again.
39
9650150
Automatic main beam headlights
In order not to dazzle other road users,
the lights are automatically deactivated
when approaching cars travelling in the
opposite direction or when following a
car travelling in the same direction.
This function is enabled with the display
Menu or the Alfa Connect system, and
with the light switch turned to .
The first time the main beam headlights
are activated (pushing the left lever), the
function is activated (the white symbol
comes on in the instrument panel
display).
If the main beam headlights are actually
on, the blue warning light
will also
come on in the instrument panel display.
When the speed is higher than 40 km/h
and the function is active, the lights
switch off if the stalk is pushed n the
direction of travel in the toggle position
again.
When the speed is lower than 15 km/h
and the function is active, the function
switches the main beam headlights off.
If the fixed main beam headlights are
operated quickly again (pushing the
left stalk in the direction of travel and
releasing it), the blue warning light/icon
will switch on in the instrument panel
and the main beam headlights will
be switched on fixed until the speed
exceeds 40 km/h.
When the speed of 40 km/h is exceeded
again, the function
is activated
automatically again.
If the lever is pulled again in this
condition, to request main beam
headlight deactivation, the function
remains off and the main beam
headlights switch off.
To deactivate the automatic function
rotate the light switch ring to position
.
When the speed is higher than 40 km/h
and the function is active, the lights
switch off if the stalk is pushed n the
direction of travel in the toggle position
again.
ADAPTIVE DRIVING BEAM (ADB) WITH
GLARE-FREE TECHNOLOGY
(where provided)
The "Glare Free" technology assists the
driver when driving on highway roads
with poor ambient lighting by allowing
the use of high beam lights even in the
presence of other cars without the risk
of dazzling them.
The glare-free effect is achieved by
arrays of LEDs, which are dynamically
switched on and off to detect a shaded
area at the headlights of every vehicle
on the road (including motorbikes and
bicycles), based on information about the
headlights of other cars provided by the
forward-facing digital camera located on
the windscreen below the interior rear-
view mirror.