Alfa Romeo Tonale, Руководство пользователя, Страница: 29 / 296

27
make sure that the seat belt is
positioned laterally on panel (1) fig. 27
(where provided), then raise the
backrests pushing them backwards
until the locking click is heard on both
coupling mechanisms (1) fig. 28, visually
checking that the "red notches" on the
levers (2) fig. 27 are not visible (the "red
notches" indicate that the backrest is not
coupled).
28
9650144
Backrest centre part (rear armrest)
Before tilting the backrest, lower the
head restraint completely making sure
that the rear central seat belt is not
fastened and that there aren't any
objects in the central part of the cushion
(if there are any, remove them).
Pull the handle (1) fig. 29 and tilt the
central part of the backrest.
The backrest central part, once tilted,
can be used as rear armrest as well; it is
equipped with a cup/bottle holder.
19)
WARNING Before repositioning the
central part of the backrest check that
there are no beverages or objects in
the cup holder which could obstruct
the coupling area (remove them where
provided).
29
9650145
WARNING
16) All adjustments must be made with the
car stationary.
17) After releasing the adjustment lever,
always check that the seat is locked on the
guides by trying to move it back and forth.
If the seat is not locked into place, it may
unexpectedly slide and cause the driver to
lose control of the car.
18) Make sure the backrests are properly
secured at both sides (not visible “red
notches”) to prevent them from moving
forward, in the event of sharp braking, with
possible impact with the passengers.
19) If a passenger is present, it won't be
possible to use the armrest, but the central
backrest needs to be properly attached.
IMPORTANT
5) The fabric upholstery of the seats has
been designed to withstand long-term wear
deriving from normal use of the car. Some
precautions are however required. Avoid
prolonged and/or excessive rubbing against
clothing accessories such as metal buckles
and Velcro strips which, by applying a high
pressure on the fabric in a small area, could
cause it to break, thereby damaging the
upholstery.
6) Do not arrange objects beneath the
electrically adjustable seat and do not
impede its movement, since the controls
may be damaged. They may also restrict the
seat travel.
7) Before tilting the backrest, remove any
objects on the seat cushion.