Alfa Romeo Tonale, Руководство пользователя

Страница: 26 / 296

KNOWING YOUR VEHICLE
24
21
9650139
17)
Height adjustment (where provided):
adjust lever (2) upwards or downwards to
obtain the required height.
Backrest angle adjustment : move
lever (3) to adjust the backrest angle,
accompanying it with the movement of
the torso (operate the lever until the
desired position is reached, then release
it).
Electric lumbar adjustment (where
provided): operate the joystick (4) .
ELECTRICALLY ADJUSTABLE FRONT
SEATS
6)
The buttons for electrically adjusting
the seat can be used to adjust the height
(where provided), longitudinal position
and angle of the backrest.
22
9650140
Height and/or cushion tilt adjustment
(where provided): act on the front or rear
part of the switch (1) fig. 22.
Longitudinal adjustment : push switch (1)
forwards or backwards to move the seat
in the corresponding direction.
Backrest angle adjustment : push switch
(2) fig. 22 forwards or backwards to
adjust the backrest in the corresponding
direction.
Electric lumbar adjustment (where
provided): operate the joystick (3) fig. 22.
WARNING The electrical adjustment is
only allowed when the ignition device
switch is turned to ENGINE, and for
about 20 minutes after it is turned
to STOP. The seat can be moved for
approximately 20 minutes after opening
or closing the door.
NOTE With the ignition device in the
STOP position, the electric adjustment
will automatically deactivate if the doors
of the car are locked from the outside.
Storing the driver’s seat positions
(where provided)
This function allows the driver to store
up to two different profiles, which can
be easily recalled by pressing buttons
(1), (2), (3) on the side of the inside door
handle on the driver's side door panel
fig. 23. Each stored profile (profile 1 or 3)
contains the desired position settings
for the driver's seat and a number of
radio stations pre-selected on the Alfa
Connect system.
23
9650337
Memorisation and recall is possible
both with the ignition device in ENGINE
position and the vehicle stationary, and
with the vehicle moving (up to a speed
of approx. 2 km/h), and for 20 minutes
from when the ignition device is moved
to STOP. Storage of the position is
confirmed by a beep.