Alfa Romeo Tonale, Руководство пользователя

Страница: 213 / 296

211
on other models, or use the space-saver
wheel of other models on your car. The
space-saver wheel must only be used in
the event of an emergency. Never use
it for more than strictly necessary and
never exceed 80 km/h. "Warning! For
temporary use only! 80 km/h max!" Replace
with standard wheel as soon as possible.
Never remove or cover the sticker on the
space-saver wheel. Never apply a wheel
cap on a space-saver wheel. The vehicle's
driving characteristics will be modified with
the space-saver wheel fitted. Avoid violent
acceleration and braking, abrupt steering
and fast cornering.
179) The jack is a tool developed and
designed only for changing a wheel, if a tyre
gets punctured or damaged, on the car
with which it is supplied or on other cars
of the same model. Any other use, e.g. to
jack up other vehicle models or different
things, is strictly prohibited. Never use it
to carry out servicing or repairs under the
vehicle or to change summer/winter wheels
and vice versa: we advise you to contact
an Alfa Romeo Dealership Never go under
the raised car: use it only in the positions
indicated. Do not use the jack for loads
higher than the one shown on its label. Never
start the engine with car raised. If the car
is raised more than necessary, everything
can become more unstable, with the risk
of the car dropping violently. Therefore,
only lift the car just enough to access the
space-saver spare wheel (where provided).
180) When turning the jack handle make
sure that it can turn freely without scraping
your hand against the ground. The moving
components of the jack ("worm screw"
and joints) can also cause injuries: do not
touch them. If you come into contact
with lubricating grease, clean yourself
thoroughly.
181) The space-saver wheel (where
provided) cannot be fitted with snow chains.
If a front (drive) tyre is punctured and chains
are needed, use a standard wheel from the
rear axle and install the space-saver wheel
on the rear axle. In this way, with two normal
drive wheels at the front axle, it is possible
to use snow chains.
182) If the hub cap (if equipped) is not
fitted correctly, it may come off when the
vehicle is traveling. Never tamper with the
inflation valve. Never introduce tools of
any kind between rim and tire. Check tire
and space-saver spare wheel pressure
regularly, referring to the values shown in
the "Technical Data" section.
FIX&GO KIT
(where provided)
DESCRIPTION
183) 184)
77)
5)
The Fix&Go is located in the boot inside
its own box.
The container is also equipped with a
screwdriver, the tow ring and the funnel
for refuelling in an emergency.
The Fix&Go fig. 219 includes:
one cartridge (1) containing sealant and
fitted with: transparent tube for injecting
the sealant (4) and sticker (3) with the
wording MAX. 80 km/h / 50 mph to be
applied in a clearly visible position (e.g.
on the dashboard) after repairing the
tyre
one compressor (2)
a pair of gloves located in the hose
compartment of the cartridge (4)
219
A0K1302C
REPAIR PROCEDURE
Proceed as follows:
stop the car in a position that is not
dangerous for oncoming traffic where
you can carry out the procedure safely.
The ground must be as level and compact
as possible
stop the engine, switch on the hazard
warning lights, apply the parking brake
and engage 1st or reverse gear if you are
downhill