Alfa Romeo Tonale, Руководство пользователя

Страница: 170 / 296

STARTING AND DRIVING
168
appearance of the symbol on the
display and the appearance of a green
circle around the speed limit sign.
COMING TO A STOP AND RESTARTING
The system can decelerate the car to a
standstill when the vehicle in front of
it slows down and stops. The system
will automatically restart the car if the
car comes to a stop and the vehicle in
front restarts within 3 seconds. If the
vehicle in front restarts after 3 seconds,
ring (3) must be turned to the SET +
position instead to reactivate the system
and restart. If the system keeps the
car at a standstill for 2 minutes, the
electric parking brake will activate and
the system will be deactivated.
NOTE The electric parking brake will
be activated and the system will be
deactivated at speeds close to stopping,
if the driver unbuckles the seat belt or
opens the door.
WARNING The driver must ensure that
there are no pedestrians, vehicles or
other obstacles in front of the car when
the system is reactivated. Failure to
comply with this precaution may cause
serious accidents and fatal injuries.
RECALLING THE SPEED
Once the system has been cancelled by
pressing the brake pedal or the CANC
button (or RES/CANC, where provided)
but not deactivated by pressing button
(1) in fig. 166, simply press the RES button
(or RES/CANC, where provided) and take
your foot off the accelerator pedal to
recall a previously set speed.
The system will be set to the last stored
speed.
Before returning to the previously
set speed, bring the speed close to
that value, press the RES button (or
RES/CANC, where provided) and release
it.
WARNING The recall function must only
be used if the road and traffic conditions
so allow. Recalling an excessively high
or low speed for the current traffic and
road conditions could cause a sudden
acceleration or a deceleration of the car.
Failure to comply with these precautions
may cause serious accidents and fatal
injuries.
SETTING THE DISTANCE BETWEEN
CARS
150) 151) 152) 153)
The distance between your car and the
vehicle ahead may be set to 1 bar (short),
2 bars (medium), 3 bars (long), 4 bars
(maximum) fig. 172.
172
9650010
The distances from the vehicle ahead are
proportional to speed. The interval of
time with respect to the vehicle ahead
remains constant and varies from 1
second (for the short distance 1-bar
setting) to 2 seconds (for the maximum
distance 4-bar setting).
The setting is 4 (maximum) the first time
the device is used. After the distance
has been modified by the driver, the new
distance will be stored also after the
system is deactivated and reactivated.
To decrease the distance
Press and release the button to decrease
the distance setting (2) fig. 166.
The distance setting decreases by one
bar (shorter) every time the button is
pressed.
Once the shortest distance has been
reached, a further press of the button
will set the longest distance. The set
speed is held if there are no cars ahead.