BOSS – Installation, Operation and Maintenance Manual
A l e n c o n S y s t e m s L L C - P a g e
|
21
Figure 10: H4/MC4 Termination
The wires from the cable gland are routed to the H4/MC4 connectors via cable ducts. This
is a fairly straight method of terminating the input and output cables without having to deal
with DIN rail mounted terminal blocks.
Communication Ports
Each BOSS unit consists of 2 x RJ45, shielded Ethernet jacks. BOSS’s are generally co-
located and easily daisy chained to a PODD. The BOSS System architecture using a
Single PODD configuration is shown below –
Figure 11: BOSS System Schematic with PODD
Terminate with 120K
resistor between Rx +
& TX +