BOSS – Installation, Operation and Maintenance Manual
A l e n c o n S y s t e m s L L C - P a g e
|
28
Config Tab
Figure 18: Configuration Tab
The Config Tab allows the user to update the configuration on the BOSS. BOSS configuration is
provided to the user in a .factory file as seen below. This file contains specific parameters for
your customized BOSSs. Do not edit these parameters unless asked to do so by Alencon
personal. Failure to follow these instructions may damage the BOSS and will void your warranty.
Figure 19: Configuration factory file to be uploaded to BOSS
The BOSSs are selected by GUID (The BOSS LIN can be found the BOSSs tab). Configuration
can be sent to the whole field or a single DCDC:
BOSSCOM and All DCDCs:
Configures all
DCDCs and communication on the selected
BOSS
BOSSCOM:
Configures communication on the
selected BOSS
DCDC 1 - 4:
Configures the individual DCDC
on the selected BOSS
All BOSSs (BOSSCOM and DCDCs):
Configures all DCDCs and communication in the
entire field
Figure 20: Available DCDC targets
