B 100
ACT 1000 T controller start-up
Alcatel Vacuum Technology France - ATP User’s Manual
1/4
GB 00418 - Edition 02 - February 98
Enter the sub-menus
by pressing
The controller performs a
self-test and identifies the
pump to which it is
connected.
The initialization time is
approximately 4 seconds.
Display initialization
The equipment is identified,
the program version is
displayed.
Indicator light test:
they are lit in succession.
The working screen is
displayed.
ACT 1000 T V2.XX
------------------------------
----------------
CHECKING PROCEDURE
SEP/20/95
12:24:54
ROT. SPEED
0 RPM
Θ
1 PUMP
21°C
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
FAULT
Configure the parameters
for the application using
the various menus.
Parameter setting
access
Selection
Validation
• used to access the parameter setting mode.
• used to exit the various menus without validating the functions.
• used to move in the menus, or
from one parameter to another.
• used to select or adjust the value of the selected parameter.
• used to validate the selection of a menu, parameter or
value.
• used to exit the menus and return to the pump parameter
display
The parameter setting keys
PREVIOUS
ENTER
STATUS
PREVIOUS
➧
Access
the parameter
programming
(see folio 2).
Once the various electrical connections have been made, set
the main switch on the rear panel to "
I
".
➧
Display and/or select
the parameters to be
monitored (see folio 4).
DISPLAY PARAMETERS
