B 10
Safety instructions
Alcatel Vacuum Technology France - ATP User’s Manual
2/3
GB 00409 - Edition 01 - March 97
Installation
Start-up
(continued)
• Before any maintenance operations on a product
performed by a maintenance technician who has not
received safety training (EMC, electrical safety, chemical
pollution, etc.), isolate the product from the various energy
sources (electricity, compressed air, etc.).
• The EMC performance of the product is obtained on the
condition that the installation complies with EMC rules.
In particular, in disturbed environments,
it is essential
to:
- use shielded cables and connections for interfaces,
- stabilize the power supply line with meshing from the power
supply source to a distance of 3 m from the product inlet.
• The units containing control circuits are designed to
guarantee normal safety conditions taking their normal
operating environment into account (use in rack). In specific
cases of use on tables, make sure that no objects enter the
ventilation openings or block the openings when handling the
units.
• Certain controllers can be configured to start up automatically
after a power cut.
In this case, it is the user's responsibility to take all the
precautions required to prevent the risks resulting from this type
of operation.
• When switching off an item of equipment containing
loaded capacitors at over 60 VDC or 25 VAC, take
precautions concerning the access to the connector pins
(single-phase motors, equipment with mains filter, frequency
converter, monitoring unit, etc.).
• When handling the equipment, use the devices provided
for this purpose (hoisting rings, handle, etc.).
