manualshive.com logo in svg

Air Monitor VELTRON DPT-plus, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Air Monitor VELTRON DPT-plus Скачать руководство пользователя страница 61

VELTRON DPT-

plus

Air Monitor Corporation

116-010-91.P65 (09/18/09)

VELTRON DPT-

plus

 - IO&M Manual

56

10 – CUSTOMER SERVICE

SECTION 10 – CUSTOMER SERVICE

10.1 – CUSTOMER SERVICE/TECHNICAL SUPPORT

Air Monitor Corporation provides in-house technical support for our products:

Monday through Friday

7 am to 5 pm (pst)

Phone: 707-544-2706 or 1-800-AIRFLOW

Fax: 707-526-2825

Additionally, on-site technical assistance is available.  Before contacting the Customer Service Department, please
ensure any applicable troubleshooting steps outlined in Section 8 have been performed.

10.2 – REPAIRS/RETURNS

If after contacting the Customer Service Department it is determined that equipment will require return to Air Monitor
Corporation for further repair, a Return Authorization number will be issued by the Customer Service Department.  A
Confirmation of Return Authorization with shipping instructions will be sent via facsimile.

Equipment to be returned to Air Monitor should be returned in its original shipping container if possible.  If this is not
possible, ensure equipment is packaged sufficiently to protect it during shipment.

CAUTION

All damage occurring during transit is the Customer's responsibility.

List the Return Authorization (R/A) number on the packing list and clearly mark this number on the outside of each
shipping container.

Costs associated with return of equipment to Air Monitor are the customer's responsibility regardless whether the
repair/return is under warranty.

10.3 – WARRANTY REPAIRS/RETURNS

Once the Customer Service Department determines that the equipment repair is under warranty, the item will be
repaired and returned to the customer at no charge.

10.4 – NON-WARRANTY REPAIRS/RETURNS

Customer will be invoiced for all parts and labor required for the repair of equipment.  Return shipping charges will also
be added to invoice.

10.5 – FIELD SERVICE

Requests for field service should be made to the Customer Service Department, who will coordinate sending a technician
to customer's site.

Phone: 707-544-2706 or 1-800-AIRFLOW

Fax: 707-526-2825

Upon completion of work, technician completes a Field Service Report and gives a copy to the customer.  Field service
is charged on a daily basis and all travel expenses are also added to customer's invoice.

Содержание VELTRON DPT-plus































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды