MN-1033
4
C. Introduction
NOTE
The purpose of this publication is to assist with the installation, maintenance and
troubleshooting of the LoadLifter 7500 XL air spring kit . LoadLifter 7500 XL utilizes
sturdy, reinforced, commercial grade single or double, depending on the kit, convolute
bellows . The bellows are manufactured like a tire with layers of rubber and cords that
control growth . LoadLifter 7500 XL kits are recommended for most 3/4- and 1-ton
pickups and SUVs with leaf springs and provide up to 7,500 pounds of load leveling
support with air adjustability from 5-100 PSI .
It is important to read and understand the entire installation guide before beginning
installation or performing any maintenance, service or repair . The information here
includes a hardware list, tool list, step-by-step installation information, maintenance
guidelines and operating tips .
Air Lift Company reserves the right to make changes and improvements to its products
and publications at any time . For the latest version of this manual, contact Air Lift
Company at
(800) 248-0892 or visit airliftcompany.com .
NOTATION EXPLANATION
Hazard notations appear in various locations in this publication . Information which
is highlighted by one of these notations must be observed to help minimize risk of
personal injury or possible improper installation which may render the vehicle unsafe .
Notes are used to help emphasize areas of procedural importance and provide helpful
suggestions . The following definitions explain the use of these notations as they appear
throughout this guide .
INDICATES IMMEDIATE HAZARDS WHICH WILL RESULT IN SEVERE PERSONAL
INJURY OR DEATH .
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE
PERSONAL INJURY OR DEATH .
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE
TO THE MACHINE OR MINOR PERSONAL INJURY .
Indicates a procedure, practice or hint which is important to highlight.
DANGER
CAUTION
WARNING
LoadLifter 7500
XL
4
DANGER
CAUTION
WARNING
Содержание LoadLifter 7500 XL
Страница 2: ......
