Air Lift LoadLifter 7500 XL, Руководство по установке

Страница: 16 / 28

MN-1033
14
fig. D.29
fig. D.30
Cut a small section of cardboard and fold it in half. When assembling the upper bracket
to the air spring, set this cutout under the carriage bolt between the roll plate and upper
bracket to hold the carriage bolt in place. This will make it easier to tighten the mounting
hardware once in place on the frame (Fig. D.28).
8 . Set the lower bracket assembly aside . Pick up the driver's side (F) and passenger's
(right) side (D) upper brackets (Fig . D .29) . Insert two 3/8”-16 x 1 1/4" carriage bolts
(O) up through the bottom of the driver's (left) side (F) and passenger's (right) side
(D) upper brackets (Figs . D .29 & D .30), through the two square holes that are on
the corresponding side . Also, insert one 3/8"-16 x 2" carriage bolt (M) through the
remaining hole . The head of this carriage bolt will be hidden once the upper bracket
is mounted to the air spring .
TECH TIP
O
F
M
fig. D.28
O
D
Driver’s
(left) side Passenger’s
(right) side
Driver’s (left) side
Passenger’s (right) side
LoadLifter 7500 XL
14