Air Lift LoadLifter 7500 XL, Руководство по установке

Страница: 15 / 28

MN-1033
13
The air fitting
must be on
this side of the
assembly .
Driver’s
(left) side
The 3/8 " -16 x 10 " carriage bolts will be behind the axle once the assembly is installed on
the axle.
6 . The lower bracket assembly has two sets of air spring mounting holes, one for the
driver’s (left) side, the other for the passenger’s (right) side . Insert one 5/16"-18 x 1"
carriage bolt (BB) into the square hole as shown for the driver's (left) side assembly
(Fig . D .24) . Using the corresponding holes in the lower bracket designated (Figs . D .24
& D .25), attach the air spring to the bracket using the 3/8"-24 x 3/4" flat-head screws
(JJ) and torque to no more than 20 lb .-ft . (27Nm) .
7 . Figures D .26 & D .27 shows the driver’s (left) side and passenger’s (right) side
assemblies .
Passenger’s (right) side air
spring mounting holes shown
in relation to the 3/8"-16 x
10" carriage bolt previously
installed . When installing on
the air spring, make sure the
bracket edge facing you is on
the fitting side of the air spring .
Driver’s (left) side air spring
mounting holes shown in
relation to the 3/8"-16 x
10" carriage bolt previously
installed . When installing on
the air spring, make sure the
bracket edge facing you is on
the fitting side of the air spring .
Passenger’s
(right) side
This slot
should be on
the opposite
side of the
air line fitting
on the air
spring once
mounted .
NOTE
fig. D.24
fig. D.25
fig. D.26 fig. D.27
LoadLifter 7500 XL
13